Olipoleyizaqize Single-Wall Connecting Pipe

A single-wall stainless connecting pipe length that joins a stove's outlet to the insulated chimney within the room — the visible pipe above the stove. Common-diameter length; fitted within the room only, never through a wall, floor or roof, at the stated clearances by the installer. The connecting pipe above the stove. Within the room only; keep clearances.

• Type: single-wall connecting pipe length
• Use: stove outlet to insulated chimney, within the room only
• Install: never through walls/floors/roofs; keep clearances; fitted by the installer

A chimney or flue system carries the hot combustion gases from a stove, boiler stove or heater safely to the outside. It must be installed by a competent installer to the appliance maker's instructions and the applicable building rules: the correct diameter for the appliance, the stated clearances to combustibles, twin-wall insulated sections wherever the flue runs near or through combustible structure, single-wall connecting pipe only within the room (never through walls, floors or roofs), firm support and brackets, fully sealed joints, a sweepable route, and a carbon-monoxide alarm in the room. A wrong, under-insulated, unsupported or badly sealed flue is a fire and carbon-monoxide risk. Have the chimney swept regularly. These are flue components, not medical devices. CE marked where applicable. The statutory 14-day right of withdrawal applies to consumers.