Olipoleyizaqize Insulated Tee & Support Kit

An insulated tee and support kit — a twin-wall tee with a soot/condensate cap, a wall support and a base, the point an external chimney turns up the wall and takes its weight. Twin-wall tee with the support base and bracket; fixed to a sound wall and supported by the installer, sealed at every joint. The load-bearing turn of an external chimney. Anchor of the range. Fixed to sound wall by the installer; sealed.

• Type: insulated tee + support kit
• Build: twin-wall tee, soot/condensate cap, wall support, base
• Install: fixed to a sound wall and supported by the installer; joints sealed

A chimney or flue system carries the hot combustion gases from a stove, boiler stove or heater safely to the outside. It must be installed by a competent installer to the appliance maker's instructions and the applicable building rules: the correct diameter for the appliance, the stated clearances to combustibles, twin-wall insulated sections wherever the flue runs near or through combustible structure, single-wall connecting pipe only within the room (never through walls, floors or roofs), firm support and brackets, fully sealed joints, a sweepable route, and a carbon-monoxide alarm in the room. A wrong, under-insulated, unsupported or badly sealed flue is a fire and carbon-monoxide risk. Have the chimney swept regularly. These are flue components, not medical devices. CE marked where applicable. The statutory 14-day right of withdrawal applies to consumers.